Miller Bobcat 3 Phase User Manual

 A complete Parts List is available at www.MillerWelds.com
OM-4436 Page 28
8-2. Routine Maintenance
Follow the storage procedure in the engine owner’s manual if the unit will not be used for an
extended period.
Note
 Stop engine before maintaining.
 See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
 = Check  = Change  = Clean  = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-2
 Fuel Level  Oil Level  Oil, Fuel Spills
Every
20
Hours
Section 8-7
 Spark Arrestor Screen
Every
25
Hours
Section 8-3
 Air Cleaner Wrapper
Every
50
Hours
 Weld Terminals
Every
100
Hours
Engine
Manual,
Section 8-3,
8-4
 Battery Terminals  Cooling System  Oil  Air Cleaner Element
Every
200
Hours
Engine
Manual,
Section 8-4
 Unreadable Labels  Spark Plug Gap  Oil Filter  Fuel Filter
Every
500
Hours
Engine
Manual
 Weld Cables  Slip Rings*
 Brushes*
Every
1000
Hours
OR
 Inside Unit

Miller Bobcat 3 Phase Specifications

General

Brand	Miller
Model	Bobcat 3 Phase
Category	Welding System
Language	English