DECLARATION OF CONFORMITY
For United Kingdom (UKCA marked) products.
MILLER Electric Mfg. LLC, 1635 West Spencer Street, Appleton, WI 54914 U.S.A. declares that
the product(s) identified in this declaration conform to the essential requirements and
provisions of the stated Regulation(s) and Standard(s).
Product/Apparatus Identification:
Wireless Foot Control and 14 Pin Transceiver
Wireless Hand Control and 14 Pin Transceiver
Wireles Transciever 14 pin
Regulations:
• S.I. 2017/1206 The Radio Equipment Regulations 2017
• S.I. 2012/3032 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations
Standards for conformity with essential requirements of S.I. 2017/1206:
Regulation of S.I. 2017/1206
EN IEC 62368-1: 2020/A11:2020
EN 62479:2010
EN 62209-2:2010 (Hand Control Only)
EN 50566:2017 (Hand Control Only)
6.1 (a): Health and Safety
ETSI EN 301 489-1 V2.1.1 (2017-02)
ETSI EN 301 489-17 V3.1.1 (2017-02)
EN 60974-10:2014/A1:2015
6.1 (b): Electromagnetic Compatibility
ETSI EN 300 328 V2.2.2 (2019-07)
6.2: Efficient use of Radio Spectrum
Standards for conformity with other essential and relevant requirements:
• EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic products
with respect to the restriction of hazardous substances
Signatory:
_____________________________________ ___________________________________________
David A. Werba Date of Declaration
MANAGER, PRODUCT DESIGN COMPLIANCE
To Next Page
Loading...
