OM-492 Page 29
Return To Table Of Contents
Every 500 h
Replace fan belt.
Flush radiator.
Repair or replace
cracked cables.
Drain sludge from
fuel tank.
FUEL
SLUDGE
Every 800 h
Check valve
clearance.*
Every 1000 h
Blow out or
vacuum inside.
During heavy
service, clean
monthly.
OR
Service welding generator
brushes and slip rings. Service
more often in dirty conditions.*
Every 2000 h
Replace radiator
coolant and hoses.
See Section 8-6.
Replace fuel
lines and
clamps. See
Section 8-5.
8-3. Servicing Spark Arrestor
Ref. 213 263-B-B / 802 743 / Ref. 802 656
Stop engine and let cool.
1 Cleanout Plug
Remove plug and remove any dirt
covering cleanout hole.
Start engine and run several min-
utes to blow out cleanout hole. If
nothing blows out of hole, briefly
cover end of exhaust pipe with fire-
proof material.
1
1/4 in
Tools Needed:
To Next Page
Loading...
