Miller Syncrowave 350 LX
User Manual

OM-356 Page 10
3-2. Torch/Cable Holder Label
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Electric shock from wiring can
kill.
3 Do not operate unit or reach
inside when torch/cable
holder is removed.
4 Do not exceed 25 lb (12.4 kg)
maximum load on gun/cable
holder or holder may break.
1 3
2
206 345 A
2
1
3-3. Weld Cable Connection Label
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Electric shock from welding
electrode or wiring can kill.
3 Welding sparks or arcing from
unused electrode can cause
explosion or fire.
4 Do not connect more than one
electrode cable to any single
weld output terminal.
Disconnect cables for process
not in use. Have only one
welding circuit (process)
connected at any given time
— never two.
1 2 3
4

Miller Syncrowave 350 LX
Specifications

General

Amperage Range	3 - 400 A
Max. Open-Circuit Voltage	80 V
Input Frequency	50/60 Hz
Rated Output	300 A at 32 V, 60% Duty Cycle
Welding Processes	AC/DC TIG, Stick