Miltenyi Biotec MACSQuant X - Assembly; Install the Fluid Bottles

2
INSTALLATION
53
2.6 Assembly
2.6.1 Install the fluid bottles
Operating the instrument requires Running Buffer, Washing Solution, and Storage Solution. One bottle is
required for waste collection. Always operate the instrument with ready-to-use MACS® Buffers and solutions
only. The bottles, closures, tubing and fluid sensor cables are color-coded for easier handling.
1 Install only one fluid bottle at a time. Place the new bottle into the orange bottle holder. Please note the
corresponding color coding.
2 Unscrew the lid of the fluid bottle and replace it with the appropriate bottle closure delivered with the
instrument.
Figure 2.1: BConnect Waste and Storage Solution bottle.