MIMAKI CJV30 Series User Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
5.1.19 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Test Items > Test Function > TIMER CHECK
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
5.1.19 TIMER CHECK
 Function
Date and time of the device are confirmed or set.
Past date/time to be input is allowed max. 8 hours back from present time.
Inputting of other date/time becomes an error.
*Machine setting R Same as the time setting
Set value :20YY.MM.DD HH:MM:00
YY : 00 – 50
MM : 01 – 12
DD : 01 – 31
HH : 00 – 23
MM : 00 – 59
Returning to the last setting is allowed by pressing [FUNCTION] in the Date, Time Display State (not the Entering
State). (However, the time elapsed after the setting change is added.)

MIMAKI CJV30 Series Specifications

General

Cutting Function	Yes
Interface	USB 2.0, Ethernet
Power Supply	AC 100-240 V, 50/60 Hz
Print Head	Piezoelectric Inkjet
Resolution	1440 dpi
Print Resolution	Maximum 1440 dpi
Printing Technology	Solvent Inkjet
Print Speed	Up to 17.5 m²/h
Ink Type	Solvent Ink
Ink Colors	CMYK, White
Maximum Print Width	1610 mm (CJV30-160 model)
Media Width	1372 mm (54 inches)
Media Thickness	Maximum 1.0 mm
Cutting Force	500 g
Weight	180 kg (CJV30-160 model)