MIMAKI CJV30 Series - Machine Setup

© 2009 MIMAKI ENGINEERING CO.,LTD.
8.2.4 P.1
1
2
3
4
5
6
7
8
R.1.3
Maintenance Manual > Operation Flow > Print Mode > MACHINE SETUP
Model CJV30/TPC Issued 2008.08.04 Revised 2009.10.29 F/W ver. 2.50 Remark
1.3
Rev.
8.2.4 MACHINE SETUP
FUNCTION
MACHINE SETUP <ENT>
DEODORIZE FAN
STOP TIME <ent>
DEODORIZE FAN
STOP TIME = 120Min
MACHINE SETUP
DEODORIZE FAN <ent>
DEODORIZE FAN
RENEW <ent>
DEODORIZE FAN
RENEW =OFF
[FUNCTION],
[] / []
OFF,10 to 240min,
CONTINUE
ON
[FUNCTION],
[] / []
[FUNCTION],
[] / []
DRYNESS FEED
SETUP :OFF
MACHINE SETUP
DRYNESS FEED <ent>
ON
STAMP SETUP
STAMP :OFF
MACHINE SETUP
STAMP SETUP <ent>
ON
[FUNCTION],
[] / []
WasteInkWarning
SETUP :ON
MACHINE SETUP
WasteInkWarning<ent>
OFF
[FUNCTION],
[] / []
TestPrintArrange
SETUP :FEED DIR.
MACHINE SETUP
TestPRT.Arrange<ent>
SCAN DIR.
TEST PRINT: PAGE No
OFF : OFF
ON
*Displayed by press of [FUNCTION]
with Stamp set to “ON” only in mainte-
nance OPEN mode
[FUNCTION],
[] / []
CART. PRIORITY
SELECT :INK LEVEL
MACHINE SETUP
CART. PRIORITY <ent>
EXP.DATE
[FUNCTION],
[] / []
ENV. TEMP.
SELECT :Wait arrival
MACHINE SETUP
ENV. TEMP. <ent>
Not wait ARR.