- 10 -
Unpacking and Assembling
Assembling the pedestals and the device
• The pack of the device is as heavy as approximately 200 kg. Perform
the assembly work by at least four persons to ensure safety.
• Exercise added care not to drop the main unit on your feet.
1. Lift down the carton which contains the exhaust
plotter and legs.
2. Remove the four screws which fix the packing legs
and packing pads.
Take the plotter out of the carton together with the packing legs,
then put it on the floor.
3. Remove the four screws (two at each end) which fix
the packing legs to the plotter.
• Do not hoist the handle with a crane, or the
plotter may become faulty.
packing leg
packing leg
handle
To Next Page
Loading...
Need help?
General