- 31 -
Turning the power OFF
To turn the power off, check first whether or not there is data received and there remains data that has
not yet been output in the device.
Also be sure that the head rests at the capping station.
• If the power is turned off while the device is engaged in plotting, the
head may fail to be retracted in the capping station. If the head is left
without capped for an extended period of time, the nozzle will be
clogged with dust.
If the power to the device is turned off without the head capped, re-
turn on the power to the device.
• Do not turn OFF the main power switch. The nozzle blockage preven-
tion function is disabled.
1. Push the power switch on the front panel of the
plotter once.
To Next Page
Loading...
Need help?
General