MIMAKI JV300-130 - Storage of Packing Components

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.5 P.14
R.1.1
1
2
3
4
5
6
7
INSTALLATION GUIDE > Printer Assembly > Storage of packing components
Model
JV300
Issue
2014.04.11
Revised 2014.05.08 F/W ver.
1.00
Remark
1.1
Rev.
4.5 Storage of packing components
 Work procedures
1. Attach the metal sheet for packing and the rubber feet on the
back surface of main unit with the screws (P4x20 SMW x 4).
2. Attach the stay 1 on the back surface of main unit with the
screws (CS6x20 SMW x 6).
Rubber feet
Metal sheet for packing
Stay 1