MIMAKI ML Tiger-1800B MKII - PLC Error List: Connection and Command Errors; Specific PLC Error Codes and Solutions

67
Error
No.
Error
level
Error displayed Cause Measures
F796
2
Big Roll
Unwinder
Inverter Alarm
Inverter error of Big
Roll UNWINDER
1. Tap the [DETAIL] button in [SYSTEM
ALARM] of MPC, and tap the [CLEAR
ALARM] button.
2. If the Alarm is displayed again after tapping
the [CLEAR ALARM] button, turn off the
power of the internal PC and then the main
power of the machine in this order, and
then turn on again after a while.
3. If the Alarm appears again, contact your
dealer, our sales office, or call center.
FF01
2
PLC Connection
Error
PLC AP PLC
disconnection
occurred
1. Check the connection between the internal
PC and PLC.
2. Tap the [DETAIL] button in [SYSTEM
ALARM] of MPC, and tap the [CLEAR
ALARM] button.
3. If the Alarm is displayed again after tapping
the [CLEAR ALARM] button, turn off the
power of the internal PC and then the main
power of the machine in this order, and
then turn on again after a while.
4. If the Alarm appears again, contact your
dealer, our sales office, or call center.
FF10
0
PLC AP Error
Occurred
PLC AP PLC
occurred
1. Tap the [DETAIL] button in [SYSTEM
ALARM] of MPC, and tap the [CLEAR
ALARM] button.
2. If the Alarm is displayed again after tapping
the [CLEAR ALARM] button, turn off the
power of the internal PC and then the main
power of the machine in this order, and
then turn on again after a while.
3. If the Alarm appears again, contact your
dealer, our sales office, or call center.
FF30
0
PLC AP
Initialization
Failure
PLC AP Initialization
failure
FF31
0
PLC AP
Uninitialization
Processing cannot be
continued because
PLC AP is not
initialized.
FF32
0
PLC AP Failed
To Connect
PLC AP Failed to
connect
1. Check the connection between the internal
PC and PLC.
2. Tap the [DETAIL] button in [SYSTEM
ALARM] of MPC, and tap the [CLEAR
ALARM] button.
3. If the Alarm is displayed again after tapping
the [CLEAR ALARM] button, turn off the
power of the internal PC and then the main
power of the machine in this order, and
then turn on again after a while.
4. If the Alarm appears again, contact your
dealer, our sales office, or call center.