MIMAKI ML Tiger-1800B MKII - Other Error List: MDC FW Errors; Specific Other Error Codes and Solutions

78
Error
No.
Error
level
Error displayed Cause Measures
MDC FW_Error
CA 01 2
CA01:00(ZZZZZZZZ)Calibration
Value is Not Stable
The AD value during
calibration is not
stable for a certain
period of time.
Turn off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
I
f it appears again, contact
your dealer, our sales office,
or call center.