MIMAKI SWJ-320 S4 - Check Pattern

© 2013 MIMAKI ENGINEERING CO.,LTD. 5.1.1 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Test Items > Test Function > CHECK PATTERN
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 1.0 Remark
1.0
Rev.
5.1.1 CHECK PATTERN
 Outline
The following check patterns are possible to draw.
 List of CHECK PATTERN
* Pattern of the [DROP CHECK] dose not heve menu of the [Y resolution]-[Drawing color].
100% 50% 25% 6.25%
NOZZLE V-L INE H-LINE SLANT
GRADATE V-1B1W H-1B1W
DROP CHECK
*
No Operation Selectable Values / Description
1 Select a pattern Select a desired one among the check patterns listed above.
2 Select X resolution 300, 600, 900, 1200 dpi
3 Select Y resolution 360, 540, 720, 1080, 1440 dpi
4 Effective line selection HEAD line1, HEAD line2, All
5 Select scan direction and the
number of divisions.
Direction : SiDir
Divisions : 8 passes
6
Select drawing size *
2
X: 10 ~ 9990 mm
Y: 10mm to the width of media detection
7 Select drawing color MCYK
8 Start drawing. [ENTER]: Starts drawing.
[REMOTE]: Selects nozzles and Switches between high speed scanning ON and OFF.
9 During drawing. [END]: Stop the drawing.