MIMAKI SWJ-320 S4 - Central IO PCB Assy

© 2013 MIMAKI ENGINEERING CO.,LTD. 2.3.4 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Electrical Parts > Circuit Board Specifications > Central IO PCB assy.
Model SWJ-320S Issued
2012.07.19
Revised F/W ver. Remark
1.0
Rev.
2.3.4 Central IO PCB assy.
 Outline
Unit name: Central IO PCB assy.
MounteFeeding slack sensord position: Electrical box
 Main specifications
Pump motor, Wiper motor, Sensor, Suction fan (etc.) are connected.
 List of Connectors
*For the details of connecting destinations, refer to the block diagram.
Parts No. Pin Connected to:*
Connecting desti-
nation CN
Remarks
CN1 10 Not use Spare
CN2 10 Not use Connector is not mounted.
CN3 20 EPL Main PCB assy. CN9
CN4 3 Stop switch
CN5 16 Not use Spare
CN6 16 Not use Spare
CN7 9 Not use For Debug
CN8 8 Ink pressurizing part, Suction fan
CN9 30 Wiper sensor,
X-axis origin sensor,
Y origin sensor,
Feeding slack sensor
CN10 12 Suction fan, Ink pressurizing part
CN11 5 ID contact PCB CN032 assy.
CN12 10 Not use Spare
CN13 12 Pump Motor STM3, 4 (S4 only)
CN14 20 Ink pump, Ink pressurizing part
CN16 12 Pump Motor, Wiper Motor STM1, 2, 5
CN17 20 Not use Spare
CN18 4 Not use
CN20 3 Cascade short 13 assy.