MIMAKI SWJ-320 S4 - Replace Count

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.9 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment > Adjustment Items > REPLACE COUNT
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 1.0 Remark
1.0
Rev.
4.2.9 REPLACE COUNT
 Outline
Indicating the following items of machine on the LCD.
 REPLACE COUNT List of Items
 Procedures
1. Select [#ADJUST] -> [REPLACE COUNT].
2. Select the item to be indicated, and then fix it by [ENTER] to
indicate it.
[]/[]: Switch
[ENTER]: Finalizes
(to Information indicating display)
[END]: Return
No Item Remarks
1 SCAN COUNT Number of scans
2 USE TIME Time of Power ON Unit: [H]
3 WIPING COUNT Number of wiping
4 DRAW LENGTH Drawing length [m]
5DRAW AREA
Drawing area [m
2
]
6 PUMP MOTOR Rotation time of each pump motor Unit: [H]
FUNCTION
#ADJUST [ENT]
#ADJUST
REPLACE COUNT [ENT]
#REPLACE COUNT
SCAN COUNT : 0
USE TIME
WIPING COUNT
:
#REPLACE COUNT
PUMP MOTOR [ENT]