MIMAKI SWJ-320 S4 - Adjust Wiper

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.12 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment > Adjustment Items > ADJUST WIPER
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 1.0 Remark
1.0
Rev.
4.2.12 ADJUST WIPER
 Outline
Adjusts the wiper position.
The adjusted value is stored in the system parameter.
 Work Procedures
1. Select [#ADJUST] -> [ADJUST WIPER].
2. Confirm and adjust the center position of the head and the wiper
nozzle.
[]/[] : Horizontally shifts the head.
[ENTER] : Finalizes and end
[END] : End
3. After adjustment, register with the [ENTER] key and then ter-
minate the operation.
FUNCTION
#ADJUST [ENT]
#ADJUST
ADJUSTWIPER [ENT]
#ADJUSTWIPER
WIPERPOS. =2.0
‑20.0〜20.0
Wiper
Head