MIMAKI SWJ-320 S4 - Head ID

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.15 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment > Adjustment Items > HEAD ID
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 1.0 Remark
1.0
Rev.
4.2.15 HEAD ID
 Outline
HEAD ID represents each head characteristic written at shipping. The variation between heads is unified by inputting
the value to printer.
As this machine reads the head ID from the mounted memory (ROM) on the print head at each startup, it
is not necessary to set the head ID.