MIMAKI SWJ-320 S4 - Page 17

© 2013 MIMAKI ENGINEERING CO.,LTD. 2.3.1 P.3
2.3.1 DC Power Supply (DC37V)
R.1.2
1
2
3
4
5
6
7
8
NEW : PLA600F-36-R
 Outline
Unit name: Switching power supply (PLA600F-36-R)
Mounted position: Electrical box
 Main specifications
Power supply for internal circuit (DC37V).
List of Connectors
 Terminal block
 Connector
*For the details of connecting destinations, refer to the block diagram.
Terminal block
Pin No.
Terminal
name
Function Connected to:* Remarks
1 L AC(Line) input Noise Filter
2 N AC(Nutral) input Noise Filter
3FGFG
4 V- 0V EPL Main PCB assy. CN11
5V-0V
6 V+ DC37V EPL Main PCB assy. CN11
7 V+ DC37V
Parts No. Pin Connected to:*
Connecting desti-
nation CN
Remarks
CN1 10 EPL Main PCB assy. CN12
POW_CN1, POW_CN2 and PW_CN3 of DC-POW cable 320Assy. is not connected.
(DC-POW cable 320assy. is two CN1 connectors.)
Connector which is written “LC-POW CN1” is connected to the CN1 of the power supply.
MAINTENANCE MANUAL > Electrical Parts > Circuit Board Specifications > DC Power Supply (DC37V)
Model SWJ-320S Issued
2012.07.19
Revised 2013.08.28 F/W ver. Remark
1.2
Rev.
SWJ-320S2:M031E121 ~
SWJ-320S4:M131E525 ~