MIMAKI SWJ-320 S4 - Page 55

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.2 P.3
4.2.2 [HEAD ADJUST] Carriage base tilting
R.1.0
1
2
3
4
5
6
7
8
5. Loosen the carriage base fixing screws (4).
6. Adjust the tilting of carriage base with the adjusting screw so
that the head unit most slanting to the right comes in straight.
• The amount of movement per one screw rotation:
Approx. 50 µm (The amount of front and back
movement of pattern line)
• Carriage base moving direction
Screw clockwise: Tilting right
Screw counter-clockwise: Tilting left
7. Fix the carriage base screw loosened.
8. Repeat the above procedure 3 to 7 until the tilting is within the
acceptable range.
Adjustment screw
MAINTENANCE MANUAL > Adjustment > Adjustment Items > [HEAD ADJUST] Carriage base tilting
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 2.20 Remark
1.0
Rev.