3. Maintenance Procedure
12
2
Select [Station] > [Carriage Out] > [Head Maint.], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance covers.
4
Remove the mist filter.
• To remove the mist filter, pull the knob to the front while pushing the tabs in the direction indicated
by the arrow.
5
Clean the filter.
• Remove the filter and press down on it with a paper towel to remove dirt.
• Wipe off the dirt adhering to the filter case.
• Replace the mist filter if it gets very dirty—for example, due to liquefaction of ink adhering
to the filter.
"Mist Filter Replacement"(P. 21)
6
Reattach the mist filter in its original position.
7
Once cleaning is complete, close the cover, then press the [ENTER] key.
Ink Discharge Channel Cleaning
Clean the ink discharge channel regularly to prevent clogging of the ink discharge channel below the cap.
To Next Page
Loading...
