MIMAKI UCJV300 Series - Chapter 1: Before Using This Product

4. Consumable Item Replacement
21
7
Clean the carriage base.
Cap base
8
Mount a new cap absorber.
• Push the tabs on the cap absorber into the slits at the rear of the C slider, and clip in the tabs at
the front.
Claw
Cap absorber
Push in to engage tabs.
9
Once replacement is complete, move the wiper back to the rear by hand.
10
Close the front cover, then turn on the power.
• Check to confirm that the carriage returns to the station.
Mist Filter Replacement
Check the mist filter. Replace if very dirty.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Head Maint.], then press the [ENTER] key.
• The carriage moves to the maintenance space.