MIMAKI UCJV300 Series - Pen Line Replacement

4. Consumable Item Replacement
32
Pen Line Replacement
This machine can be used with the following pen lines.
• Pen line rubber
Used for pen writing or cutting
• Pen line sponge
Used for half cut (cutting across a dotted line)
To order replacement consumable items, contact your local dealer or our service office.
Item Code
PEN LINE RUBBER FOR 300/150-160 SPC-0770
PEN LINE RUBBER FOR 300/150-130 SPC-0771
PEN LINE RUBBER FOR 150-107 SPC-0772
PEN LINE RUBBER FOR 150-75 SPC-0773
PEN LINE SPONGE FOR 300/150-160 SPC-0775
PEN LINE SPONGE FOR 300/150-130 SPC-0776
PEN LINE RUBBER FOR 150-107 SPC-0777
PEN LINE RUBBER FOR 150-75 SPC-0778
For more information on other consumable items, refer to our website. https://mimaki.com/supply/inkjet.html
1
Open the front cover.
2
Use tweezers to peel off the end of the pen line.
• Wipe off any adhesive remaining in the platen slot with alcohol.
3
Attach double-sided tape in the platen slot.
• Peel off the base paper from the double-sided tape.
4
Attach the pen line on the double-sided tape.
• Make sure the pen line lies flat.
5
Close the front cover.