MIMAKI UCJV300 Series - Exhaust Fan Filter Replacement

4. Consumable Item Replacement
23
3
Open the maintenance covers.
4
Remove the LED glass.
• Unclip the tabs and slide to the side to remove.
• Be careful not to apply too much force when unclipping the tabs. Disregarding this precaution may
break the tabs.
Claw
5
Mount a new LED glass.
• Insert until it clicks into place, and confirm that the tabs are engaged.
6
Once replacement is complete, close the cover, then press the [ENTER] key.
Exhaust Fan Filter Replacement
Check the exhaust fan filter condition. Replace if very dirty.