- 12 -
Compositing the clear ink image with the color job
1.
In the job list, select the color job and the clear ink job.
• Click the “Composition” icon.
2.
Carry out the following check.
(1) Is the clear ink job above the color job in the job
list.
• If it is not, use drag and drop to change the
positions around.
(2) After the above check, click the [Composite]
button.
3.
The images will be composited.
• Printing will be carried out in either of the following ways, depending on the [Priority Policy] set-
ting on the ［Composition］ screen.
“Speed”: The color image and clear ink image are printed simultaneously using special
color overprinting.
In this case, the UV mode set for the color image is ignored and the conditions
set for the clear ink image are used.
“Quality”: The color image is printed first and the clear ink image is printed after.
In this case, the UV modes set respectively for the color image and clear ink
image are applied respectively to each image.
• In the case of gloss printing, please seeP.14 "a. Setting Glossy Print"
To Next Page
Loading...
Need help?
General