AS3000™ Service Manual 0070-10-0683 ix
Notes Introduction
CAUTION: The bellows dome cannot be autoclaved.
CAUTION: Do not clean the machine while it is on and/or plugged in.
CAUTION: Pressing “Quit” at any time during the procedure will cancel
the session's settings and reload the previously-stored
calibration coefficients.
CAUTION: Depleted soda lime changes color. Replace the soda lime if
approximately 2/3 of the absorber content is discolored.
CO
2
absorbent can be safely changed without stopping
mechanical ventilation.
Notes
NOTE: Unauthorized servicing may void the remainder of the
warranty. Check with the factory or with a local authorized
distributor to determine the warranty status of a particular
instrument.
To Next Page
Loading...
