6 - 56 Operator’s Manual
6 Image Acquisition
Volume data is loaded to Fusion Imaging exam. The page is given below:
Acquiring Freehand Volume Data
Except importing existing volume data, the operator can also acquire freehand 3D cine on fusion
imaging mode.
6.15.6 Marks
Mark tumor position, lesion position on CT/MR/PET/Freehand image. Be sure of the lesion
appearing on US and CT/MR/PET/Freehand image at the same time after the registration is
completed.
Mark the tumor or lesion on CT/MR/PET/Freehand image after CT/MR/PET/Freehand data is
loaded. Generally, it is available to mark the tumor or lesion before/during/after the registration.
Perform the following procedure:
1. Tap [Mark on Volume Data] to enter the page. Select [Add Marks]>[Display Marks] to activate
the mark.
To Next Page
Loading...
