A Barcode Reader
Operator’s Manual A - 9
Code 93 and codabar setting
• To enable Code 93, scan the appropriate barcode below.
• To enable Codabar, scan the appropriate barcode below
Code 39 full ASCII setting
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII
character set.
• To enable Code 39 Full ASCII, scan the appropriate barcode below.
• To disable Code 39 Full ASCII, scan the appropriate barcode below.
I 2 of 5 symbols setting
Select this option to decode only I 2 of 5 symbols containing a selected length. Select the length
using the numeric barcodes below. For example, to decode only I 2 of 5 symbols with 8 characters,
scan I 2 of 5 - One Discrete Length, then scan 0 followed by 8.
A.2.4 Scanning in Hand-Held Mode
Perform the following procedure:
1. Ensure all connections are secure (see the appropriate host chapter.)
To Next Page
Loading...
