19 System Maintenance
Operator’s Manual 19 - 5
Please clean all dust-proof covers of the system periodically (1 time per
month); otherwise, system damage may result. Cleaning times can be
increased when the system is used in the open air or somewhere dust is more.
Cleaning the peripherals
Do the cleaning maintenance according to your actual peripheral configuration; items which are not
configured can be skipped.
19.1.2 Checking the Probe
• Visually check to confirm that there is no crack and expansion to probe head.
• Visually check to confirm that there is no deterioration or desquamation to probe cable.
• Visually check to confirm that there is no bend, destroyed or falling off pins to the connector.
Content Description
Color and B/W video
printer
First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if is necessary.
Graph / text printer First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if is necessary.
Footswitch Use soft dry cloth with a little mild soap water to wipe off the dust or
stain attached to the pedals or cable of foot switch.
Barcode reader First use soft dry cloth to wipe off dust attached to glass panel of the
reader, then the dust or strain attached to cable and bracket. For detail,
see “A Barcode Reader”.
To Next Page
Loading...
Need help?
General
