Mindray Resona R9 - Saving Stress Echo Data; Exiting the Stress Echo Feature; Measurement and Report

11 - 6 Operator’s Manual
11 Stress Echo
3. Repeat step 2 to perform value assign for all segments.
– To assign a normal wall motion score (WMS) to all currently displayed views:
Select [Set All Normal] on the touch screen.
– To assign a normal wall motion score (WMS) to the currently selected view:
Select [Set Current Normal] on the touch screen.
11.4 Saving Stress Echo Data
Stress Echo data consists of Stress Echo loops, wall motion scores, and all other information
pertaining to the Stress Echo portion of a patient examination.
When the exam is ended, the system will save all images within the exam.
11.5 Exiting the Stress Echo Feature
Tap [End SE Exam] to exit the Stress Echo feature.
11.6 Measurement and Report
Suspend the stress echo exam by selecting [Suspend Exam]. Press the measurement related keys or
buttons to enter cardiology measurement.
Reports contain the entered indication, if any, and also any entered comments that are specific to
the report. You can include or exclude data from specific phase(s). You can preview and print the
report for the currently selected mode. You can also enable colored report printing in Maintenance.
For details, see the “Advanced Volume”.