VS 8/VS 8A Vital Signs Monitor Operator’s Manual 12 - 9
12.2.2 Accessing the GCS Dialog
Select the GCS value to enter the GCS dialog.
12.2.3 Performing GCS Scoring
To perform scoring, follow this procedure:
1. From the Eye Opening area, Verbal Response area, and Motor Response area,
respectively select an item that represents the patient’s status.
(1) Subscores
(2) Total score. The color of the circle indicates the level of risk.
(3) Scoring time
12 - 10 VS 8/VS 8A Vital Signs Monitor Operator’s Manual
2. Select OK to accept the total score.
3. Select the Save quick key to save GCS scoring.
The following table lists the default score range and color of relevant consciousness
level.
• The GCS score range is adjustable. Refer to 16.7.3 Setting GCS Threshold for
Each Consciousness Level for the method of changing the high limit and low
limit of each consciousness level.
12.2.4 Reviewing GCS Data
If the GCS data is correctly saved, you can review the GSC data following this procedure:
1. Select the Review quick key → select Scoring Review tab.
2. Select a record from the list, and then select Detail.
3. Check the LOC(GCS) value.
12.3 Pain Score
The monitor provides pain score functions to help assess a patient’s pain. The following
scales are provided by default:
■ VAS-cm: a visual analog scale of 0 to10 cm.
■ VAS-mm: a visual analog scale of 0 to 100 mm.
■ NRS: a numeric rating scale, using numbers to rate the pain.
■ VRS-5: a verbal rating scale of 0 to 5.
■ FPS-R: face pain scale revised.
■ FLACC: stands for face, legs, activity, crying, and consolability.
You can also add custom pain scores to the list. For details, refer to 16.8.5.2 Adding a
Custom Pain Scale.
Pain Score is applicable for adult, pediatric, and neonatal patients.
Level Range Color
Mild damage 13 to15 White
Moderate damage 9 to 12 Yellow
Severe damage 3 to 8 Red
To Next Page
Loading...
