4. Maintenance and Care
Cleaning the Nozzle:
After printing is complete, promptly clean the residue on the nozzle using a tool and taking advantage of the
nozzle's residual heat. Avoid touching the nozzle directly with your hands to prevent burns.
Replacing Filaments:
Timely replace filaments based on the type and actual usage. It is recommended to use filaments
recommended by the manufacturer. Seal filament not in use for an extended period, as excessive exposure to
moisture in the air can make the filament brittle.
Checking the Platform:
Regularly check if the print platform is flat. If there is deformation or damage, contact the manufacturer or
dealer for repairs.
Regular Lubrication:
Periodically apply lubricating oil to the lead screw and guide rails. During the operation of the printer, friction
between various parts occurs. Without proper lubrication, it can lead to wear and damage.
Software Updates:
Regularly update the printing software to improve print quality and efficiency.
27
To Next Page
Loading...
