28
Valve Removal for height adjustment
- Remove seat from vehicle, lay seat on its back side, access to valve is through bottom of
suspension.
- Remove nut (1), remove Bowden cable (2 - black) from bracket (3) and pull cable nipple
(4) out of valve lever (5).
- Carefully lift up fixing tabs (6) and Remove air pipes (7 – yellow and red) from valve (11).
- Unhook spring (8).
- Turn around valve (11) on scissor tube (12) and pull it off the scissor tube (12).
After mounting: See page 29
To Next Page
Loading...
