Minolta DI2510 - Initial Settings Configuration

6
6.2 Initial Settings
6-4 Di2010/Di2510/Di3010/Di3510
Administrator Management Operations Chapter 6
6.2 Initial Settings
Specify the date and time
Specify the date and time so that they will be correctly recorded in the reports.
To set the date and time
1 Follow the procedure described in “To display the Administrator Management
screens” on page 6-2 to display the Administrator Management screen.
2 Touch [Admin. 1], and then touch [Initial Settings].
3 Touch [Date/Time Set].
4 Touch [TimeDate].