Minolta DI2510 - To Set the Output Priority Function

5
5.3 Changing Default Settings
5-24 Di2010/Di2510/Di3010/Di3510
Utility Mode Operations Chapter 5
To set the “Output Priority” function
This specifies the default finishing modes that are selected by priority.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [4/6], and then touch
[Output Priority].
4 Select the desired settings, and
then touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.