Minolta DI2510 - To Clean the Touch Panel (Panel Cleaning Function)

5.7 User Management Functions
5
Di2010/Di2510/Di3010/Di3510 5-39
Utility Mode Operations Chapter 5
1 Press the [Utility] key.
2 Touch [User Management], and then touch the button for the beep that you wish
to adjust.
3 Touch and to select the desired volume, and then touch [Enter].
4 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
To clean the touch panel (“Panel Cleaning” function)
By setting panel cleaning, you can clean the panel without accidentally pressing
panel buttons.
1 Press the [Utility] key.
2 Touch [User Management], and
then touch [Panel Cleaning].
❍ To cancel the function, press
the [Panel Reset] key.