Minolta DI2510 - To Set the Density Priority Function

5.3 Changing Default Settings
5
Di2010/Di2510/Di3010/Di3510 5-21
Utility Mode Operations Chapter 5
To set the “Density Priority” function
This specifies the default printing density / copy mode settings.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [4/6], and then touch
[Density Priority].
4 Select the desired settings, and
then touch [Enter].
❍ The default Output Density can
be set to either [Auto] or
[Manual].
❍ The default Original Image
Type can be set to [Text],
[Photo] or [Text/Photo].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.