Minolta DI2510 - To Set the Plug-In Counter, ID Key Reset Function

5.3 Changing Default Settings
5
Di2010/Di2510/Di3010/Di3510 5-19
Utility Mode Operations Chapter 5
To set the “Plug-In Counter, ID key Reset” function
Pressing the [Access] key when specifying administrator settings specifies whether
or not to return to default settings, with the exception of when the data controller
magnetic card is removed.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [3/6], and then touch [Plug-
In Counter, ID key Reset].
4 Touch [ON] or [OFF], and then
touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.