Minolta DI2510 - To Make Settings for the OHP Interleaving Function

4
4.3 “OHP Interleaving” Function
4-8 Di2010/Di2510/Di3010/Di3510
Auxiliary Functions Chapter 4
To make settings for the “OHP Interleaving” function
1 Load the document into the duplexing document feeder or position it on the
original glass.
2 Touch [Auxiliary], and then touch
[OHP Interleaving].
3 Select either the [With Image] or
the [Blank] OHP Interleaving
setting, and then touch the button
below “Insert Paper”.
4 Select the paper drawer that
contains the paper for the
transparency interleaves, and
then touch [Enter].