Minolta DI2510 - To Set the Printing Density Function

5.3 Changing Default Settings
5
Di2010/Di2510/Di3010/Di3510 5-23
Utility Mode Operations Chapter 5
To set the “Printing Density” function
This specifies the default printing density level settings from -2 to 2, in 5 steps.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [4/6], and then touch
[Printing Density].
4 Select the desired settings, and
then touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.