Minolta DI2510 - To Set the Language Selected for LCD Function

5.3 Changing Default Settings
5
Di2010/Di2510/Di3010/Di3510 5-9
Utility Mode Operations Chapter 5
To set the “Language Selected for LCD” function
This function is used to specify the language for the screens that appear in the
touch panel.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [1/6], and then touch
[Language Selected for LCD].
4 Select the desired language, and
then touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.