Minolta DI2510 - To Make Settings for the Edge;Frame Erase Function

4.5 “Edge/Frame Erase” Function
4
Di2010/Di2510/Di3010/Di3510 4-13
Auxiliary Functions Chapter 4
To make settings for the “Edge/Frame Erase” function
1 Load the document into the duplexing document feeder or position it on the
original glass.
2 Touch [Auxiliary], and then touch
[Edge/Frame Erase].
3 Select the desired Edge/Frame
Erase setting.
4 Touch and to specify the width of the erased area, and then touch
[Enter].
❍ If [Cancel] is touched, the setting is cancelled.
5 Press the [Start] key.
The copies are printed.