Minolta DI2510 - To Set the Drawer Priority Function

5
5.3 Changing Default Settings
5-12 Di2010/Di2510/Di3010/Di3510
Utility Mode Operations Chapter 5
To set the “Drawer Priority” function
You can specify the priority of the paper that is selected (paper drawer).
For example, if you specify a paper drawer for paper that you use frequently,
(recycled paper, single-sided only paper, etc.), that drawer will have priority when
supplying paper. However, this function will not operate when there are settings
such as auto paper selection, or where paper is limited.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [2/6], and then touch
[Drawer Priority].
4 Select the desired paper drawer,
and then touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.