Minolta DI2510 - Black-White Reverse Function; Reversing White- and Black-Colored Areas of Copies; To Set the Black-White Reverse Function

4
4.10 “Black-White Reverse” Function
4-22 Di2010/Di2510/Di3010/Di3510
Auxiliary Functions Chapter 4
4.10 “Black-White Reverse” Function
Reversing White- and Black-Colored Areas of Copies
Copies can be printed with the white- and black-colored areas of the original image
reversed.
✎
Tip
The white and black colors of the distribution number and watermark will not be
reversed.
The white and black colors of the original cannot be reversed after the document
has been scanned.
To set the “Black-White Reverse” function
1 Load the document into the duplexing document feeder or position it on the
original glass.
2 Touch [Auxiliary], and then touch
[Black-White Reverse].
3 Press the [Start] key.
The copies are printed.