Minolta DI2510 - To Set the Output Tray Function (Optional)

5
5.3 Changing Default Settings
5-26 Di2010/Di2510/Di3010/Di3510
Utility Mode Operations Chapter 5
To set the “Output Tray” function (optional)
This function is used to specify how copies and computer printouts are separated
and which output tray they are assigned to.
✎
Tip
[Output Tray] only appears if the finisher or the job separator is installed.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [5/6], and then touch
[Output Tray].
4 Select the appropriate output tray settings, and then touch [Enter].
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.