Minolta DI2510 - Distribution # Function; Printing Distribution Numbers on Sets of Copies; To Make Settings for the Distribution # Function

4
4.7 “Distribution #” Function
4-16 Di2010/Di2510/Di3010/Di3510
Auxiliary Functions Chapter 4
4.7 “Distribution #” Function
Printing Distribution Numbers on Sets of Copies
Each set of copies can be printed with a distribution number added to the back-
ground.
✎
Tip
If the “Distribution #” function is used, the “Sort” Finishing setting is selected.
After “999” is printed, the number returns to “000”.
To make settings for the “Distribution #” function
1 Load the document into the duplexing document feeder or position it on the
original glass.
2 Touch [Auxiliary], and then touch
[Image Settings].
3 Touch [Distribution #].