4.6 “Image Repeat” Function
4
Di2010/Di2510/Di3010/Di3510 4-15
Auxiliary Functions Chapter 4
4 Select the size of the document.
❍ If the document has a non-
standard size, touch [Custom
Size], and then specify the size
of the document.
5 Touch .
Then, touch and to
select the length of side X for the
paper that is loaded.
❍ Touch until the cursor
moves below the fraction that
you wish to change.
6 Touch .
Then, touch and to
select the length of side Y for the
paper that is loaded.
❍ Touch until the cursor moves below the fraction that you wish to
change.
7 Touch [Enter].
❍ If [Cancel] is touched, the setting is cancelled.
8 Press the [Start] key.
The copies are printed.
To Next Page
Loading...
