Minolta DYNAX 7 - Wireless;Remote Off-Camera Flash

113112
Wireless/Remote Flash is available
with the Minolta 5600HS(D), 5400HS,
3600HS(D), 5400xi, and 3500xi
accessory flashes. Wireless/Remote
flash lets you experience the creative
control available with an accessory
flash.
In Wireless/Remote flash mode, the
off-camera flash is triggered by a
coded signal from the camera’s built-
in flash when you press the shutter-
release button. When proper
exposure has been received, another
signal cuts the accessory flash off.
You can also achieve a 2:1 lighting
ratio automatically. When remote ratio
flash is selected, the off-camera flash
provides 2/3 of the full exposure while
the built-in flash provides the remain-
ing 1/3.
Normal Flash
Wireless/Remote Ratio Flash
Wireless/Remote Flash
1. Attach the accessory flash to
the camera, then turn the cam-
era and the flash on.
2. Turn the flash-mode switch to
WL.
• The wireless set display
appears in the navigation
display.
3. Turn either control dial and
select normal wireless or ratio.
• Normal Wireless : When selected, only the accessory flash fires.
• Ratio: When selected, the built-in flash will provide 1/3 and the
accessory flash will provide 2/3 of the total exposure.
WIRELESS/REMOTE OFF-CAMERA FLASH
FLASH