147146
DATA RECALL
1. Open the control-panel door
and press the DATA button.
• Display shows current data
memory settings.
2. Turn the front or rear control
dial to select READ, and then
the desired fim area and data
number.
Film area
Data number
Film speed
Press the adjust button to recall the data.
•If appears, the focus-area selector and
spot-AF button can also be used to select the
film area (p. 150).
3.Press the ADJ button.
• The 1st frame’s data will be
shown.
Selecting the Display and Frame
4. Press the display selection but-
ton to choose between show-
ing a single frame’s data and
four frames’ data.
• When appears, switching between
the single and four frames data dis-
play can be done using the display
selection button.
Single frame display 4-frame display
Recorded data is shown on camera display.
Data Readout
DATA MEMORY
To Next Page
Loading...
