EasyManuals Logo

Minolta DYNAX 7 User Manual

Minolta DYNAX 7
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
127126
TIME EXPOSURES (BULB)
ADDITIONAL FEATURES
To reduce camera blur, attach a remote cord (p. 191).
5. Cover the viewfinder with the
eyepiece cap.
The eyepiece cap prevents light from
entering through the viewfinder and
affecting the metered exposure.
6. Press and hold the shutter-
release button to take the pic-
ture.
During the time exposure, the exposure time will
be shown on the navigation display.
4. Compose your picture.
If the scene is too dark for autofocus to operate, turn the focus-mode
switch to MF and focus the lens manually (p. 48).
3. Turn the rear control dial to
select the aperture.
Set the shutter speed to bulb when
you want to take time exposures.
When selected, the shutter remains
open as long as the shutter-release
button is held down.
Mount the camera on a tripod.
1. While pressing the exposure-
dial mode dial lock-release but-
ton, turn the exposure-mode
dial to M.
2. Turn the front control dial until
BULB appears in the naviga-
tion display.

Table of Contents

Other manuals for Minolta DYNAX 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Minolta DYNAX 7 and is the answer not in the manual?

Minolta DYNAX 7 Specifications

General IconGeneral
Camera TypeSLR
Film Format35mm
Flash Sync Speed1/200 sec
Sensor TypeN/A (Film Camera)
Sensor SizeN/A (Film Camera)
Effective PixelsN/A (Film Camera)
Lens MountMinolta A mount
Shutter Speed1/8000 to 30 sec, Bulb
ISO RangeISO 6 to 6400
ISO SensitivityISO 6 to 6400
ViewfinderPentaprism
Storage MediaN/A (Film Camera)

Related product manuals