When an Indicator Lights Up
7. When the I. U. Service Life Indicator Light Up
Swing out the Bottle Holder.
1
Hold the Starter Bottle so that its tab is
on the upper side, shake it well.
2
Then, swing in the Bottle Holder until
it locks into position.
Close the Front Door.
5
Plug the Power Cord into the Wall
Outlet and turn ON the Power Switch.
This with cause the wait indicator to be
shown on the control panel.
6
Peel off the tape from the Starter
Bottle.
3
Align the markings on the Starter
Bottle with the upper side of the Bottle
Holder and slide the Bottle into
position.
4
Charging the Copier with Starter and Toner
Insert the Bottle all the way into the
copier until the marking on the Bottle
is aligned with the marking on the
Bottle Holder.
NOTE
4445U006AA
1139O1410A
4445U007A
4445U008AA
1139O6012A
Chapter 5
81
To Next Page
Loading...
